WPC foamed board machine developed by POLYTECH IN 2009.
It contains following parts:
1. Feeder machine
3. T die mould
4. Shaping calibrating mould
5. Vacuum shaping system
6. Cooling rack with 12 meters
7. 8 pairs haul off
9. Stacking frame
Width of finished product
Thickness of finished product
55kw, 37 kw
We focus on the co-extrusion technology which keep high output and overcome many operating problems for the one layer board;
The co-extrusion product will be more cost saving and good surface looking;
Our customer can have more choises to make the board accroding their market, one layer or two layer;
The most important is that our machine line can stablely and continously produce.
1. The excellent appearance of the natural wood.
2. It can be cut, paint, bonded and fixed with nails or bolts.
3. The wood-plastic foamed board is mainly used in wall panel, decorating plate, construction formwork, kitchen cabinet, cloth cabinet, bath room cabinet, fence, stair handrail, etc.
1. How about density range for furniture board?
Normally from 0.4 to 0.65 cm3/g.
2. How to adjust the board thickness during production?
Our shaping mould has micro adjustment system, which ensure proper change for its thickness.
3. How to do the maintenance for machinery?
Gear box oil changed each 4000 to 5000 hours;
Lubricant each necessary parts by checking regularly;
Cloth coating for some calendar roller;
Frequently checking the electric components;
Clean some rubber part by cleaning liquid.