1. WPC Flooring Sheet Production Machine
WPC Flooring Sheet Production Machine is made up of the extruder, mold, foam board calibration table, natural cooling system, hauling off machine.
2. What Is The Manufacturing Processing Of Luxury WPC Flooring Sheet Production Machine?
WPC Flooring Sheet Production Machine adopts special design of screw & barrel, mould and extruder for wood plastic products.
1. WPC thick board extrusion line;
2. WPC profile extrusion line;
3. WPC pelletizing extrusion line and different kinds of WPC mould.
3. What Is Machine Requires For Luxury WPC Vinyl Flooring Extrusion Machine?
STEP1 Prepare And Mix Ingredients (WPC, PE With Additives):
1. RLZ500/1000 High Speed Turbo Mixer
2. SJSZ-92 Luxury WPC Vinyl Flooring Extrusion Machine
STEP2 Extrude The Mixture, Laminating The Wooden Line Film And Wear Layer Online:
1. Luxury WPC Vinyl Flooring Extrusion Machine
2. Crusher and Miller for WPC Vinyl Flooring
If there is any defective products or leftover materials will be crushed and milled into powder for recycle using.
4. How Is WPC Different From LVT?
This biggest difference is that WPC Floor is waterproof, so it can be laid over most subfloors with little preparation.
1. WPC's LVT layer and WPC layer are glued together, the peel strength is still very good, even better than the LVT color film layer and frosted sheet after hot pressing.
2. WPC is more stable than PVC.
3. WPC installation cost is far lower than ordinary brushed PVC floor, lower than ordinary PVC lock floor, and glue-free PVC floor, magic buckle and washable rubber PVC floor installation cost is not much different.
4. The waterproof of WPC is quite good, and the waterproof of this layer of wood plastic is also very stable. On the contrary, magic buckle, washing glue, ordinary brush-type PVC floor, because of the glue involved, the waterproof effect is general.
5. Several Issues For WPC Floor Customer
(1) Because the LTV layer of WPC is generally only 1.5mm thick, the plate pattern should be as flat as possible. Do not do the hand and the classic slate (slate pattern).
(2) The cost of the 6.0MM wood-plastic layer is 5.0 dollars higher than the 5.0MM wood-plastic layer.
WPC+2.0mm EVA Form: Price + USD1.00SQM
WPC+1.5mm Cork: Price + USD1.50SQM