The Characteristics Of Insert - Type Drip Irrigation Tape
1. Manufactured by secondary molding process, with higher manufacturing accuracy.
The use of the production line of drip irrigation tape with embedded patch.
2. The formulation of this material improves the degree of anti-corrosion and anti-aging.
The products of drip irrigation tape produced by the production line are widely used in planting field crops, fruits and vegetables, landscaping, etc.
3. The spacing of the embedded patch drop head can be set to meet the irrigation requirements of different crops, and to meet the water-saving and increasing efficiency to the maximum extent.
4. Multi-window water inlet is adopted to improve the anti-clogging performance, together with the design of turbulent flow channel, the state is stable and the water dripping is uniform.
The Characteristics Of The Production Equipment For Optimal Material Drip Irrigation Belt
1. Adopting PLC centralized control, the production process is stable and easy to operate, which can effectively and continuously produce drip irrigation tape products with embedded patch.
2. The feeding, screening, conveying, storage, quantitative supply and embedding of the drip head are completed automatically and synchronously. The conveying operation speed can be adjusted according to the production speed of the drip irrigation tape, so as to ensure that the drip head can be delivered to the best bonding position of the drip head and the pipe band accurately and firmly.
3. The extruder adopts new structure of screw barrel, head and coffin sizing sleeve, and USES special material and advanced process to finally make the material plasticized uniformly, the surface of pipe is smooth, and the sizing dimension is accurate.
4. The vacuum water tank and cooling water tank are made of stainless steel. The vacuum degree in the vacuum water tank and the temperature of the circulating cooling water can be adjusted flexibly and accurately according to the production requirements and remain stable.
5. Two tractors with frequency conversion control are adopted. The traction speed can be adjusted synchronously according to production requirements.
6. Mechanical stamping is adopted to complete the punching, and equipped with automatic chip absorber device. The drilling speed is fast and there is no residue.
7. Dual-station central expansion force take-up and far-infrared electronic counting device are adopted. When the length is set, the take-up device will automatically alarm, and the take-up does not need to stop. Crimp length can be set freely (close at 2000m).
Speed can be up to 200m/min.
Production speed achieve new breakthroughs the machine can produce 200 meters per munite.
Drip pipe wighing only 7g/m,the machine can produce the pipe with weight of 7g/m.
Reduce costs by 30%, save material 30% more than domestic same specifications.
Wall thickness 0.15mm, the range is 0.15-0.6mm.
Dripper is imported from Europe, weight is 0.1g. The dripper is embedded-style drip irrigation emitters, making by efficient injection technology, all made in Europe, local production, quality assurance.
PLC automatic winding control system: automatically rewinding controlled by servo motor by PLC HMI control operations.