Twelve Characteristics Of Synthetic Resin Tile

- Aug 25, 2020-

1、 Energy saving and sound insulation

The thermal conductivity of synthetic resin tile is 0.325w/m.k, which is about 1 / 3 of clay tile, 1 / 5 of 10 mm thick cement tile and 1 / 2000 of 0.5 mm thick color steel tile. Without considering the insulation layer, the insulation performance of the tile is still the best. The experiment of phoneme measurement shows that the tile can absorb the noise well under the influence of rainstorm, hail and gale.

2、 Good impact resistance and low temperature resistance

The steel ball of 1 kg weight falls freely on the tile surface from 1.5 m height without cracks. After 10 freezing cycles, there are no hollowing, bubbles, peeling and cracks.

3、 Lasting color

The color stability of the composite resin tile can be maintained even if it is exposed to ultraviolet, moisture, heat, cold and impact for a long time. After 6000 hours of artificial aging test in national chemical building materials testing center, the test result △ e = 3.4.

4、 Excellent load resistance

According to the National Quality Supervision Station of building materials and components, when the support interval is 750mm, the weight is 150kg, and the product is not damaged.

5、 Excellent self waterproof performance

The high weatherability resin used in synthetic resin tile is compact and does not absorb water, so there is no problem of microporous water seepage. The single sheet area of synthetic resin tile is large, the roof joints are few, and the lap joint is tight, so the waterproof layer can be omitted.

6、 Light weight

The synthetic resin tile weighs 5.9kg per square meter and is a lightweight material. There is no need to install too many steel structures, and the bearing requirements of wall and foundation are small.

7、 Self cleaning

The product itself should not absorb dust. Once washed by rain, it will be as clean as new, and there will be no mottled phenomenon after being washed by scale.

8、 Excellent corrosion resistance

The product can resist the corrosion of acid, alkali, salt and other chemical substances for a long time, and will not be eroded by rain and snow, resulting in performance degradation.

9、 Strong fire resistance

The main resin of the product is a fire-resistant product, and the fire-proof performance of the product has reached B1 level according to the national fire protection authority.

10、 Volume stability

The expansion coefficient of the composite resin tile is 4.93 × 10-5 (1 / ℃), and it has biaxial tensile property in geometric design. Even if the temperature changes greatly, the expansion and contraction of the tile can be digested by itself to ensure the geometric dimension stability of the tile.

11、 Insulation

Another technical feature of the product is that it is not conductive and will be intact in case of accidental discharge.

12、 Easy to install

The product is only fixed on the steel sandalwood with screws, supplemented with main ridge, oblique ridge and other accessories, it can be durable, with a service life of more than 35 years.

It can be seen that synthetic resin tile, as an excellent tile category, is very promising, and it is also necessary to select excellent synthetic resin tile equipment.