Maintenance Of PVC Wallboard Equipment

- Aug 14, 2020-

PVC wallboard equipment extrusion production of stone plastic floor in the usual maintenance also need to pay attention to many details:

1、 Purpose of cleaning and maintenance

1. Improve appearance, make elastic floor fully show its extraordinary appearance and natural gloss.

2. Extended life: due to pvc wall panel equipment extrusion production of stone plastic floor itself close surface knot and special treatment. Pay attention to the daily cleaning and maintenance, which can make the floor easier to care and prolong the service life.

3. To protect the elasticity of stone plastic floor extruded by PVC wallboard equipment: prevent the floor from the erosion of accidental chemicals, cigarette end traces, shoe prints, oil and water, minimize the mechanical wear on the surface, and give full play to the durability of the stone plastic floor extruded by PVC wallboard equipment, and keep the elasticity more durable.

1551170725265330

2、 Tips on stone plastic floor maintenance of PVC wall panel equipment extrusion production

(1) Clean and maintain the stone plastic floor produced by PVC wallboard equipment after laying (before use)

1. Remove the dust and sundries on the floor surface first.

2. Clean the floor with 3M red abrasives or similar products at low speed (diluted with 1:20 strong general cleaner with water and then added into the floor cleaner) to remove the protective wax, grease, dust and other dirt on the surface of stone plastic floor extruded by PVC wallboard equipment, and absorb the sewage with water suction machine.

3. Wash and dry with water.

4. Top 1-2 layers of high strength surface wax as required.

5. Cleaner: strong general cleaner, high strength wax

6. Tools: ground grinder, red grinding disc, water suction machine, wax drag, water press

(2) Daily cleaning and maintenance

1. Push or vacuum. (drag the dust traction agent on the ground and push the dust after drying.)

2. Wet tow. (dilute the floor cleaner with water at a ratio of 1:20 and mop the floor with a semi wet mop.) If necessary, you can also use the floor cleaner with wash & Shine low speed cleaning.

3. Cleaning agent: ground drag dust agent, floor cleaning polish agent

4. Tools: dust push, mop

1551170730228207

(3) Regular cleaning and maintenance

1. Push or vacuum.

2. The stone plastic floor cleaning and polishing agent produced by PVC wallboard equipment is diluted with water at 1:20, and then the floor is mopped or polished with high-speed polishing machine and red grinding plate.

3. Upper 1-2 layers of high strength surface wax.

4. According to the need, can cooperate with high-speed polishing machine and white polishing pad polishing treatment.

5. Cleaner: floor cleaning polish, high strength wax

6. Tools: dust pusher, ground grinder, red / white grinding disc, water suction machine, wax drag water press

(4) Treatment of special dirt

1. Oil stain: for local oil stains, pour the original liquid of water-based oil remover directly on the towel to wipe; for large area of oil stains, dilute the water-based oil remover at 1:10, and clean it at low speed with a floor wiping machine and red grinding plate.

2. Black offset printing: use spray cleaning wax with high-speed polishing machine and white pad for polishing. For a long time of black offset printing, you can directly pour the strong black offset remover on the towel to wipe.

3. Gum or gum: use professional strong gel remover directly pour on the towel to wipe off.

4. Cleaning agent: water based degreaser, spray cleaning and maintenance wax, strong black offset remover, strong degumming agent.

3、 Precautions of stone plastic floor care in extrusion production of PVC wallboard equipment

1. Timely remove all kinds of dirt on the stone plastic floor extruded by PVC wallboard equipment, remove oil, pour the original liquid of water-based oil remover on the towel to wipe, large area of oil dirt can be cleaned by the floor wiping machine; the black offset printing can be polished with a polishing machine and a white polishing pad. For a long time of black offset printing, you can directly pour the strong black offset remover on the towel to wipe; glue or chewing gum, pour the professional strong degumming agent directly onto the towel to wipe off.

2. It is forbidden to soak the stone plastic floor produced by PVC wallboard equipment in water. Although some floors are separated from water by waterproof glue, who is soaked for a long time will seriously affect the service life of the stone plastic floor extruded by PVC wallboard equipment. During the cleaning process, the water shall be absorbed by the water suction machine in time.

3. The maintenance period should be shortened and the waxing frequency of high wall wax should be increased in the places with more people and wear.

4. It is forbidden to use hard and rough cleaning tools, such as steel ball and cleaning cloth, to prevent sharp objects from colliding with elastic floor.

5. A foot mat can be placed at the entrance of public places with high pedestrian flow to prevent sharp objects from colliding with elastic floor.