Product Description
High Quality with Low Price HDPE Road Ma can handle loads up to 80 tons, depending on the surface quality and consistency. For most grass lawns and athletic fiellds you can comfortably move tractor trailers, cranes, forklifrts, staging, generators, and other pneumatic-wheeled equipment of up to 80 tons. For muddy and/or flooded areas, mats should be linked with metal connectors. Foretech offers 2-and 4-way metal links depending pn your needs.
Each mat has the connection holes that allow mats to be connected side-by-side or at 90-degree angles to one another. Create temporary roadways and compound flooring easily with foretech ground mats. Each foretech ground mat has 4 connection holes, one at each corner,and 4 additional connection holes (2each at the center of the 8ft side). These allow panels to be connected in either direction and to be rotated at 90-degree angles as required.
Benefits
-Creats an instant roadway over virtually any type of terrain-mud,sand,marshy,uneven or soft terrai.
-Protects valuable turf during landscaping projects.
-Superior alternative to plywood and fiberglass-will not warp,rot,crack or delaminate.
-Save time & labor geeting vehicles and equipment traversed over difficult terrain.
-Avoid potential injuries to workers incurred while dislodging vehicles &equipment form mud.
-Protects vehicles &equipment form excessive wear and damage due to operating on unstable ground conditions.
-Easily handled and laid by two men-no need for expensive crane wagons.
-Lay as two parallel tracks or a single roadway.
-Link together with metal connectors.
-Easily cleaned due to less aggressive lug pattern.
-Extremely durable to withstand vehicle weights up to 80 tons.
-Tested in extremes of hot and cold climates.
-Can bo used hundreds of times.
-Guaranteed for 7 years.
-Made in china-ship worldwide.
Physical Properties
High Quality with Low Price HDPE Road Mat are chemical-and weather-resistant and contain a UV additive to prevent damage and deterioration from exposure to the sun. There are no weak spots to break, chip, or separate even under extremely cold conditions.
Nominal physical properties | Astm | Unit | Value |
Density | D1505 | G/cm³ | 0.96 |
Melt Index | D1238 | G/10min | 0.5 |
HLMI | D1238 | G/10min | --- |
Condition A, F50 (100% Igepal) | D1693 | h | >500 |
Condition A, F50 (100% Igepal) | D1693 | h | --- |
Tensile Yield Strength, 50mm/min | D638TypeIv | Mpa | 26 |
Elongation at Break, 50mm/min | D638TypeIv | % | >300 |
Brittleness Temperature | D746 | ℃ | <-40 |
Flexural Modulus, Tangent | D790 | Mpa | 950 |
Shore D Hardness | D2240 | - | 65 |